Furphy Beer Fermenters
Based on extensive experience in design and fabrication of brewing vessels we are pleased to present the Furphy 100HL Beer Fermenter.
These fermenters are designed and fabricated in Australia at our manufacturing site in Shepparton, Victoria. Fabrication is to the highest quality; all seam welds are completed using our semi-automated keyhole plasma welding technology and cooling jackets are Furphy laser welded dimple plate jackets.
These vessels are currently available ex-stock in a range of sizes, 100HL, 65HL and 35 HL.
Design Features of the tank
Design Standard: AS1210-2010 Class 3
Design Pressure: +150kPa(g) / -5kPa(g)
Design Temperature: +50°C / -5°C
Capacity: 100HL (10kL) Operating Volume, + 25% headroom
Steel Grade: 304 Stainless Steel
Internal Weld Finish: 0.8 Ra
Worksafe Design Registration #: V1402932
Heat Transfer: Fully Covered FLX Laser Welded Cooling Jackets
Insulation: Polyurethane Spray Foam
Cladding: Fully Welded 304 #4 Stainless Steel
Legs: 4 Stainless Steel Pipe Legs, with Adjustable Feet
Connections: All Triclover fittings
Technical Features
Manway: 450mm hatch
Hops Inlet: 152.4mm
Pressure Gauge: Dial
CIP: 65mm Sprayball, 38mm line
Pressure Relief: 50.8mm PVRV
Cooling Jacket: 6 x 38.1mm
Temp Probes (side and btm): 15NB BSP 150mm Thermowell
Racking Arm: 38.1mm
Sample Valve: 38.1mm
Drain: 38.1mm